
Servicing
Alter
Initial
50
Hours
01
Operation
1.
Change the engine's lubrication oil and oil filter.
2. Replace the fuel filter element in the electric fuel lift
pump
and in the engine-mounted secondary fuel fil-
ter. Change the fuel filter element and clean the optional filter/water sediment or, H a separator has been
installed, and
il
the model type permits cleaning.
*3. Torque the cylinder head bolts.
*4. Adjust valve clearances.
5.
Adjust the alternator and water
pump
drive belt tension, if required.
6. Lubricate the throttle, the RUN linkage cable, and the transmission's remote control cable.
7. Change the transmission's oil.
8. Adjusts the engine's idle speed as needed.
9. Check
to
make sure the propeller shaft is securely connected
to
the transmission coupling.
Servicing
Alter
Every
100
Hours
of
Operation
1.
Change the engine's lubrication oil and oil filter.
2. Adjust the alternator and water
pump
drive belt tension, if required.
3. Check the transmission fluid
or
oil level.
Servicing
Alter
Every
250
Hours
of
Operation
1. Replace the fuel filter elements
in
the electric fuel lift
pump
and in the engine-mounted secondary fuel
filter.
2. Change the transmission's oil.
Servicing
Alter
Every
SOO
Hours
01
Operation
*1. Torque the cylinder head bolts.
*2. Adjust the valve clearances.
3. Drain,
flush, and refill the fresh water cooling system. The illustration on pages 6
to
11
show the heat
exchanger and the zinc anode location. The drain plug
for
the fresh water system is next
to
the zinc
anode.
*4. Check the condition of the starter
motor
drive pinion; lubricate the pinion.
83
Westerbeke
Diesel
Engines
Komentarze do niniejszej Instrukcji